[论文]深圳大百汇主塔楼结构设计与分析
作者:dinochen1983 日期:2020-12-02
[小记][小记]这个项目是我在WSP(2014年)参与的最有特色的一个超高层之一,岗厦旧改项目金地大百汇的主塔楼375米高,由KPF进行建筑设计,非常有特色的纺缍型的立面。越来越多的非规则立面被广泛地应用于300米以上的截面,如流线型的立面(以天津周大福为例),如拓扑优化型,如保利中心塔楼,还有就是这种纺缍型的立面,深圳大百汇、深圳长富中心,沈阳金廊城市广场都是纺缍型的立面,不但带来的美感且而提高了刚度(由于斜柱的原因),这个项目的论文并不是把超限报告的内容罗列一下,更多地分享了在方案早期结构工程师对每个构件的选型,如伸臂桁架的设置,腰桁架的选型,钢管柱尺寸的变化,幕墙骨架的设置,剪力墙的缩进,内钢骨的设置等。在超限审查的会上,深圳的专家非常敢于创新提出了很多宝贵的意见,特别是魏老,提出了很多先进的结构设计理论,让我们在做超限过程中学习到很多东西。以下就是这个论文的下载方法及介绍。
【论文下载PDF】深圳大百汇主塔楼结构设计与分析.pdf
WSP服务类别:结构设计顾问(初步设计)、机电顾问
开发商:金地大百汇集团
合作单位:筑博设计股份有限公司
建筑方案公司:KPF
【英文篇名】 |
Structure Analysis and Design of of Shenzhen Dabaihui Main Tower |
【中文篇名】 | 深圳大百汇主塔楼结构设计与分析 |
【作者】 | 陈学伟 1,黄昌靛 1,张梅松 2,黄汉华 1 |
【英文作者】 | CHEN Xuewei1,HUANG Henry 1,ZHANG Meisong2, WONG Henry 1 |
【作者单位】 | (1 WSP 科进香港有限公司,香港 999077;2 筑博设计股份有限公司,深圳 518040) |
【文献出处】 |
建筑结构 , Building Structure, 编辑部邮箱 未知 网络首发 期刊荣誉:中文核心期刊要目总览 ASPT来源刊 中国期刊方阵 CJFD收录刊 ![]() |
【中文关键词】 |
高层建筑;伸臂桁架;混合结构;加强层;钢管混凝土;斜柱体系;抗震性能设计 |
【英文关键词】 | out-of-code high-rise building; connective structure; transfer truss; aspect ratio; elastoplastic time history analysis |
【摘要】 |
深圳大百汇主塔楼位于深圳市福田区中心地段,高度为 375m,主塔楼是集办公、酒店、公寓和商业为一体的综合体。主要介绍主塔楼的结构方案的确定方法及结构设计重点。塔楼结构高度为 315.75m,地上 72 层,地下 4 层。结构体系采用带伸臂桁架与腰桁架的钢管混凝土-钢梁框架-核心筒混合结构体系。建筑立面呈纺锤形,外框柱呈曲线布置而产生一系列的斜柱。重点描述了曲线布置的斜柱体系对抗侧刚度的提高效应;伸臂桁架的选取及优化;斜柱引起钢梁水平轴力的计算方法;基于性能抗震思想对结构及构件进行大震性能评估;最终通过合 理的结构设计,保证塔楼整体刚度与构件满足抗风与抗震的性能要求。 |
【英文摘要】 |
The 375m tower of Dabaihui center is in the center zone of Futian District of Shenzhen. This super high-rise tower is a complex building that includes offices, hotels, apartments and commerce functions. This paper introduces its structural system and structural design method. The tower has 72-storey superstructure and 4-storey basement, the total building height of tower is 338m. Structure system is a frame core-wall system with outriggers and belt trusses, and the structural frame is formed with concrete filled steel tubular columns and steel beams. The elevation of the tower is curve-shaped; the frame columns are arranged to follow the curve surface. This paper introduces the stiffening effect of the frame system due to its inclined columns, and the calculation method for the axial forces of steel beams which is induced by the inclined columns. The optimization method of outriggers is also introduced. Finally, a reasonable structural design is adopted to ensure that the overall structure and components of the tower meet the performance requirements of wind resistance and earthquake resistance. |
【DOI】 | |
【更新日期】 | 2020-12-02 |
【分类号】 | TU318 |
只有一个加强层,应设在38层,其实是38与51的某层,但只有38有条件做,但是只设一个是不够的。
3.2节应该是笔误,按上下文关系应该是Y方向。谢谢北极星吧的指出。